Industrial Aerosols

Product Details:

IT-1101 based on hydrofluorocarbon fluid with zero ozone-depletion and a low global warming poten¬tial ideally suited for precision cleaning of the electronic components. It can replace current hydrochloro-fluorocarbon (HCFC) and perfluorocarbon (PFC) fluids in most applications. IT-1101 is 2,3-dihydrodecaflu-oropentane. It is a clear, colorless liquid with the properties shown in the table below. Its unique physical properties include a high density, low viscosity, and low surface tension. This combined with non-flammability, chemical and thermal stability, low toxicity, and ease of recovery by distillation make IT-1101 ideal for a broad range of applications. 

Additional Information:

• Item Code: IT-1101

Product Details:

IT-1084 is designed to provide thin layered coating onto the printed circuits or other electronic substrates to protect and significantly extend the life of the components and circuitry against environmental and mechanical damages. The coatings protect electronic printed circuit boards from moisture and contaminants, preventing short circuits and corrosion of conductors and solder joints. They also minimize dendritic growth and the electro migration of metal between conductors.  In addition, the use of conformal coatings protects circuits and components from abrasion and solvents. Stress relief is also provided, as well as protection of the insulation resistance of the circuit board. 

Product Details:

IT-1085 is dry lubricating bonded coating designed for lubrication of the sliding surfaces operating in dirty/dusty atmospheres. 

Product Details:

IT-1095 is non-staining Cleaner / Lubricant for modern textile machinery used for various operations such as spinning, winding and weaving, knitting etc. Designed using select combinations of cleansing, corrosion protection and lubricating materials, the product perform just about what is most optimally required for these machines.It is based on the specialty cleaner, synthetic lubricant and other select chemical additives & penetrates immediately to clean tint, fluff, dust and other deposits accumulated on surfaces. Further it leaves a thin, non-staining and non-sticky film of lubricant on all types of scissors & cutters of splicers / knotters that protects exposed surface from rust & corrosion and reduces the wear & tear of moving parts.

Additional Information:

• Item Code: IT-1095

Product Details:

CFC free Ozone friendly ‘Online’ cleaner spray for cleaning of the electrical contacts upto 440 V AC/ 250 VDC. It is designed for cleaning of the electronic circuits/contact parts.

Product Details:

IT-1099 is a high performance precision cleaner spray for offline Electronic Components and PCB’s. It is designed for cleaning of all types of electric, electronic circuits & components & relays, switches etc. Regular usage helps keep the contacts clean. IT-1099 should not be viewed to clean already pitted contacts.

Additional Information:

• Item Code: IT-1099

Product Details:

IT-1096 is based on solid lubricant powders, synthetic oils and various additives for corrosion protections and anti-oxidation. Designed to provide long-term, smooth lubricating action under extremes of loads and temperatures, it also helps protect metal parts from rust and corrosion when subjected to humidity and corrosive atmosphere. 

Additional Information:

• Item Code: IT-1096

Product Details:

IT-1089 is a precision cleaner spray for cleaning and degreasing of the metal surfaces. 

Product Details:

IT-1102 is zinc coating designed for corrosion protection of surfaces damaged during welding, hot galvanizing, electro-galvanizing etc. or flame-spray galvanizing). It is also used for priming of ferrous metals before further painting. It works electro-chemically on all ferrous metals, providing rust and corrosion protection indoors and outdoors. Specially formulated, it provides a tough, flexible coating that will not crack or peel even in extreme heat or cold.

Additional Information:

• Item Code: IT-1102

Product Details:

IT-1105 is a bright zinc based coating designed to prevent rust and corrosion on all types of metals for up to two years. It works electro-chemically on all ferrous metals, providing rust and corrosion protection indoors and outdoors. The coating is designed to blend in color with the previous hot-dip galvanized portions of the parts. This can also be used as a primer over rusted metal to repair hot dip galvanizing. Specially formulated, it provides a tough, flexible coating that will not crack or peel even in extreme heat or cold.

Product Details:

IT-1090 is a high Performance waxy coating designed for protection of the finely machined metal surfaces such as tools, dies, moulds, including plastic injection moulds, spare parts, machines etc. against corrosion during storage and transport. This coating also protects under tropical climate and marine conditions.

Product Details:

IT-1097 is a high temperature synthetic adhesive chain oil spray designed lubrication of the chains and wire ropes exposed to high speeds, water/sea-water contamination. It gives excellent   protection against corrosion & wear. It also does not get thrown of at high speeds and is neutral to ‘O’ rings.

Product Details:

IT-1086 is a High Temperature chain oil spray designed for:1. All kinds of Chains, joints, bearings, seals up to 250 °C2. Chain & wire rope drives at brick works, glass and ceramic industries, steel works, tube manufacturing plants, bakeries etc.

Additional Information:

• Item Code: IT-1086

Product Details:

IT-1094 is a multifunctional fluid designed as a maintenance aid. The product helps loosen rust, dismantle corroded & seized threaded connections. It displaces moisture and therefore is used for restoring wet electrical contacts. It provides mild lubrication and protects against corrosion. A low viscosity fluid, it is also often used for short-term corrosion protection esp. for corrosion protection of measuring and cutting tools. The product provides a combination of cleaning and thin film lubrication and absorbs remains of water, leaving behind a protective film on the surface which is compatible with common sealing materials. The fluid is used for protection of wet metal elements or for easy removal of fretting corrosion and corrosion residues.

Additional Information:

• Item Code: IT-1094

Product Details:

IT-1094 is s multifunctional fluid spray designed as a maintenance aid. The product helps• Loosen rust and dismantling of corroded and seized threaded connections.• Displaces moisture• Lubricate• Protects against corrosion.• Restores Wet electrical contacts

Product Details:

IT-1091 is a high Performance waxy coating designed for protection of the finely machined metal surfaces such as tools, dies, moulds, including plastic injection moulds, spare parts, machines etc. against corrosion during storage and transport. This coating also protects under tropical climate and marine conditions.

Additional Information:

• Item Code: IT-1091

Product Details:

IT-1104 is a specially formulated mold release agent that is ideal for all types of plastics when post printing is required after the molding. It does not interfere with the post finishing processes and is designed for quick, clean releases on thermosets as well as thermoplastics. It allows easy removal of parts from molds and improves surface finish of molded part. IT-1104 is non staining and odorless and does not contain any ozone depleting chemicals or CFC’s.

Additional Information:

• Item Code: IT-1104

Product Details:

IT-1103 is a specially formulated mold release agent that is ideal for all types of plastics. It is designed for quick, clean releases on thermosets as well as thermoplastics. It allows easy removal of parts from molds and improves surface finish of molded part. IT-1103 is non staining and odorless and does not contain any ozone depleting chemicals or CFC’s.

Additional Information:

• Item Code: IT-1103

Product Details:

IT-1088 is flexible coating specially formulated for use on electrical equipment. It protects against moisture and corrosion. It possesses high arc-resistance and insulating properties. IT-1088 is successfully used in applications that range from class 105 to 220.

IT-1093 is s multifunctional fluid spray designed as a maintenance aid. It helps:• Loosen rust and dismantling of corroded and seized threaded connections.• Displaces moisture• Lubricate• Protects against corrosion.• Restores wet electrical contacts

IT-1092 Dry Film Graphite Lubricant Aerosol features high lubricity and adheres to most surfaces with minimum surface preparation. The coating is conductive which air-dries rapidly at room temperature to provide clean lubrication. IT-1092 may be used where both lubrication and electrical properties are required.IT-1092 provides a long term lubrication and protects against extreme pressures and temperatures and is used for lubrication of sliding surfaces exposed to dust or water. It contains a high level of pure and fine graphite powder which results in a good electrical conductivity, as well as gliding and release agent properties. The coating exhibits good adhesion on metal, many plastics, glass and wood.

Product Details:

Motorcycles are high-speed applications that operate in tough conditions like rain, dirt, sand, and high shock loads. These specially developed chains are used as the part of the drive train to transmit the motor power to the back wheel. The chain must never be run dry. Lubricating the chain regularly prolongs its life. Depending on weather conditions, and how each one of us uses our machine, on an average, lubricate the chain every 3000 km or after a trip in the rain. Check the type of chain: If your chain is of the O-ring type, only use O-ring compatible lubricant like IT-1098 which does not attack the O-rings. Lubricate the chain without overdoing it between the links and the roller from the inside of the chain Wipe off the surplus with a rag and leave to penetrate for 30 minutes before using the machineIT-1098 is based on synthetic oils containing oil soluble organo-moly compounds. It goes on to wet to penetrate parts deeply, setting up an adhesive lubricating coating that does not fling-off at high speeds. The protective coating set up on the outer of the chains protects against the corrosion and weathering effects.

Additional Information:

• Item Code: IT-1098

Product Details:

IT-1111 is a specially formulated mixture of silicone and a cleaner/wiper solvent designed for cleaning of residues, which have accumulated on the spinneret head. The silicone prevents sticking (“dog-legs”) of the synthetic fiber to the spinneret.

Product Details:

IT-1087 is a fast evaporating cleaner spray for removal of baked-on grease, oils and grime for electromechanical assemblies, and a broad range of other equipment and parts. Non-corrosive and residue free, the easy to use aerosol removes carbon, grease, oils and varnish with a penetrating formulation that is safe on sensitive metals.

Additional Information:

• Item Code: IT-1087

Product Details:

IT-1083 is an adherent, colorless Belt Dressing Spray. It stops squeaks and squealing & gives an instant grip. Its no-stick formula helps preserve belts and it is designed to meet belt manufacturers' guidelines for all flat-ribbed and V-belts. The product contains no chlorinated solvents or CFC's.