Corrosion Protection Products

Product Details:

IT-2508 rust converter primer reverses the process of rusting. Its reactive VX-polymer converts rust into stable metal complex and attains a passive state without losing the strength of the metal. In essence it’s an encapsulation process. It cures at low temperature and very good wetting properties. The product is highly recommended intermediate coat in protective coating system. The coating can be top coated easily with a broad variety of high performance finish coats. It is simple to apply, (brush, dip, roller or spray) that requires minimal surface preparation. Just remove only the loose rust, since the adherent rust automatically gets converted into a polymer complex compound when the protective film is formed on the metal surface in a few minutes. IT-2508 is a “VX” polymer based system that provides strong bond and flexible coat that does not crack during transportation. It can withstand mild acids and alkalis, hence no carbonizing due to the presence of sulphate ions.

Additional Information:

• Item Code: IT-2510

Product Details:

IT-2503 is zinc coating designed for corrosion protection of surfaces damaged during welding, hot galvanizing, electro-galvanizing etc. or flame-spray galvanizing). It is also used for priming of ferrous metals before further painting. It works electro-chemically on all ferrous metals, providing rust and corrosion protection indoors and outdoors. Specially formulated, it provides a tough, flexible coating that will not crack or peel even in extreme heat or cold. It is a 98% zinc-rich galvanized coating that works like a hot-dip on ferrous metals indoors and outdoors. The coating withstands water temperature up to 100°C and continuous dry heat up to 400°C. Commonly used as a flash rust preventive on welded areas, it offers a long term protection. The coating is flexible coating will not yellow, chalk, crack or peel & protects the bare metal, electrochemically. Some applications where it is used are for use in the air conditioning systems and fans, fencing, piping, sumps, water tanks, gutters, metal roofs and buildings. Also used for structural steel bridges, buildings, off-shore rigs, steel windows, sheet metal and welding joints.

Additional Information:

• Item Code: IT-2503

Product Details:

IT-2506, a low viscosity fluid designed for corrosion protection is designed for corrosion protection of measuring and cutting tools. It is an excellent dewatering fluid and used for cleaning and protection of wet metal elements or for easy removal of fretting corrosion and corrosion residues. The product provides a combination of cleaning and thin film lubrication and absorbs remains of water, leaves behind a protective film on the surface which is compatible with common sealing materials.

Additional Information:

• Item Code: IT-2506

Product Details:

IT-2593, a high performance anti-corrosion coating designed for protection of the components stored outdoors, provides an excellent protection to metal substrates. It leaves wax-like film which is flexible and non-migratory. The coating can be removed with any mineral spirits or alkaline cleaners such as Ultrachem Degreaser. A film thickness of at least 50-70 microns is recommended for protection of parts in uncovered outdoor storage. IT-2593 can be applied by dipping brushing or spraying.

Additional Information:

• Item Code: IT-2593

Product Details:

IT-2590 is a high performance wax based rust preventative. The protective film, after solvent evaporation, is highly resistant to high humidity and salt atmospheres. It is particularly useful for long-term outdoor storage applications or for protection of the finely machined metal surfaces such as tools, dies, moulds, including plastic injection moulds, spare parts, machines etc. against corrosion during storage and transport. 

Additional Information:

• Item Code: IT-2590

Product Details:

IT-2595, a high performance anti-corrosion coating designed for protection of the components stored outdoors, provides an excellent protection to metal substrates. It leaves wax-like film which is flexible and non-migratory. The coating can be removed with any mineral spirits or alkaline cleaners such as Ultrachem Degreaser. A film thickness of at least 50-70 microns is recommended for protection of parts in uncovered outdoor storage. IT-2595 can be applied by dipping brushing or spraying.

Additional Information:

• Item Code: IT-2595

Product Details:

IT-2591 is a high performance thixotropic anti-corrosion protective coating. The protective film, after solvent evaporation, is highly resistant to high humidity and salt atmospheres. The product is designed for protection of semi-finished and finished machines and components, tools, spares, bearings, shafts, moving parts, spindles, etc. during storage and transport, even in extreme weather like coastal and marine atmospheres. Protects plastic injection moulds used to manufacture precision electronic components.